OD 4000 & 4800 Paper Punches

The OD 4000 & 4800 are 11 inch open-ended punches that feature the patented EZ Change Slide Out die system for changing punch patterns by simply loosening 2 bolts. The OD 4000 is and electric punch while the OD 4800 is manually operated.

Both machines were designed with the operator in mind, offering quick, easy set-up such as easy pin pulls and pre-set paper stop positions. With a full year's warranty on the machine and the dies, this is truly an industry standard. You need look no further for the best.

OD-4000 - List Price: $2050.00

FREE SHIPPING!   1-888-237-3221

OD-4800 - List Price: $949.00

FREE SHIPPING!   1-888-237-3221

Punching capacity is dependent on the punch pattern and machine being used. See comparison chart below for punching capacities.

• 11" open ended punching, up to A4 (11¾")
• Interchangeable die patterns available: your choice of 1 standard included with the machine
• Easy, "Paper to Pin" sight alignment for balanced hole-to-hole edge margins
• Pre-set paper stop guide
• Self-lubricating dies
• All metal construction
• 1 year limited warranty

Combo Binding Station (OD 3500)
The OD 3500 is simply a base that accepts the OD 4000 series Binding Modules listed above. The 3500 provides a flexible and adaptive binding station to complement your paper punch. Installation is quick and easy: less than 5 minutes to install any of the 3 modules onto the OD 3500 base unit. And since the 3500 acts as a stand-alone binding station, when used with the 4000 or 4800 punches, it will free the binding modules from your punch and essentially double your production efficiency!

Binding Station Options for OD 4000 & 4800 Punches:
The interchangeability of these modules provides a flexible and adaptive binding station to complement any paper punch. Installation is quick and easy: less than 5 minutes to install!

Important Note: These modules can stand-alone as individual binding machines or they can be attatched to the back of any HD or OD series punch!

Heavy Duty Coil Inserter Option (HD 4170)
The PDI HD4170 is a heavy-duty coil inserter that is designed for low to high-volume production. Includes 12" (305mm) Dual Powered Adjustable Rollers, for easier more accurate coil insertion. This is a high-quality, all-metal machine that can hold up to your high-volume demands. It attaches to the back of any HD or OD series punch or can serve as a standalone unit.

Comb Binding Option (HD 4470)
This HD4470 comb spreader easily accommodates 11" long plastic combs ranging from 3/16" to 2" in capacity. It attaches to the back of any HD or OD series punch or can serve as a standalone unit. The HD 4470 is the new replacement for the OD4400 wire closing module.

Manual Wire Binding Option (HD 4270)
The HD 4270 Manual Wire Binding Module easily accommodates 14" long twin loop binding wire ranging from 3/16" to 1-1/4" in diameter (with a 3:1 or 2:1 pitch) and also works for wire comb. It attaches to the back of any HD or OD series punch or can serve as a standalone unit. The HD 4270 is the new replacement for the OD4200 wire closing module.