HD 6500 & 7000 Paper Punches
The HD 6500 & 7000 are 14” open-ended punches that are designed with the operator in mind. Both machines offer quick set-up with easy pull pins as well as pre-set paper stop positions. With a full year’s warranty on both the machine and the dies, these machines are truly an industry standard. You need look no further for the best!
What is the difference between the HD6500 & HD7000?The answer is in the die-changing system.
The 7000 features the ‘EZ Change’ die system that allows you to change the punch pattern without any tools; simply release the locking levers and swap out the die!
The 6500 uses the ‘quick change ’ die system that requires the operator to remove two locking bolts before removing the die.
Punching capacity for both machines is dependent on punch pattern being used. The 6500 & 7000 are rated at 25 to 40 sheets or up to 80 pages of 20# bond (80 gsm). (15,000 - 18,000 sheets/hour). The NEW Anti-Jam feature uses an overload detection feature to trigger an auto-reversing function to eliminate jamming.
- 14" open ended punching, allows for wider applications
- 20 interchangeable die patterns available (12 standard), your choice of 1 standard included with the machine
- Use foot pedal or side-guide to activate
- Easy, "Paper to Pin" sight alignment for balanced hole-to-hole edge margins
- Smooth, quiet, power on demand operation
- Pre-set paper stop guide
- Easy-lubricating dies
- All metal construction
- 1 year limited warranty
| HD 6500 Specifications | HD 7000 Specifications | |
| Punch Capacity | Rated at 25-40 sheets of 20# bond | Rated at 25-40 sheets of 20# bond |
| Speed | 90 cycles per minute 15,000 - 18,000 sheets/hour |
90 cycles per minute 15,000 - 18,000 sheets/hour |
| Width | 14" open ended | 14" open ended |
| Jam Detection | Overload detection triggers auto-reverse function | Overload detection triggers auto-reverse function |
| Die Changing Method | Quick Change - 2 hand levers | EZ Change - 2 bolts |
| Insertion Alignment | Pre-set paper stop and side guides | Pre-set paper stop and side guides |
| Electrical | 110V, 4 amps, 60 Hz | 110V, 4 amps, 60 Hz |
| Dimensions | 17" W x 8" H x 16¾" D | 17" W x 8" H x 16¾" D |
| Weight | 87 lbs. | 87 lbs. |
| Shipping Weight | 91 lbs. | 91 lbs. |
Binding Station Options for HD 6500 & 7000 Punches:
The interchangeability of these modules provides a flexible and adaptive binding station to complement any paper punch. Installation is quick and easy: less than 5 minutes to install.
Important Note: These modules can stand-alone as individual binding machines or they can be attatched to the back of any HD or OD series punch!
Heavy Dutry Coil Inserter Option (HD 4170)
The PDI HD4170 is a heavy-duty coil inserter that is designed for low to high-volume production. Includes 12" (305mm) Dual Powered Adjustable Rollers, for easier more accurate coil insertion. This is a high-quality, all-metal machine that can hold up to your high-volume demands. It attaches to the back of any HD or OD series punch or can serve as a standalone unit.
| HD4170 Coil Inserter Specifications | |
| Max. Coil Capacity | Up to 24mm diameter |
| Electrical | 115 volt |
| Dimensions | 17.5" W x 5" H x 10" D |
| Weight | 29 lbs. |
| Shipping Weight | 14.3 lbs. |
Comb Binding Option (HD 4470)
This HD4470 comb spreader easily accommodates 11" long plastic combs ranging from 3/16" to 2" in capacity. It attaches to the back of any HD or OD series punch or can serve as a standalone unit. The HD 4470 is the new replacement for the OD4400 wire closing module.
| HD 4470 Comb Spreader Specifications | |
| Capacity | 3/16" to 2" plastic combs |
| Book Width | 11" |
| Electrical | n/a |
| Dimensions | 19 " W x 12 " H x 14 " D |
| Weight / Shipping Weight | 17 lbs. / 20 lbs. |
Manual Wire Binding Option (HD 4270)
The HD 4270 Manual Wire Binding Module easily accommodates 14" long twin loop binding wire ranging from 3/16" to 1-1/4" in diameter (with a 3:1 or 2:1 pitch) and also works for wire comb. It attaches to the back of any HD or OD series punch or can serve as a standalone unit. The HD 4270 is the new replacement for the OD4200 wire closing module.
| HD 4270 Wire Closer Specifications | |
| Capacity | 1/4" to 1-1/4" diameter binding wire |
| Book Width | 14" |
| Wire Hole Pattern | 3:1, 2:1 or 19 hole |
| Electrical | n/a |
| Dimensions | 19" W x 12 " H x 18" D |
| Weight / Shipping Weight | 22 lbs. / 24 lbs. |
Voted a "Best Equipment Vendor" since 1997.
